30" Curved Glass Wall Mount Range Hood

• Helps remove smoke, odor and moisture with 400 CFM Motor Class hood venting that helps keep your kitchen clean. Three fan speeds provide the right amount of ventilation for every meal you prepare.

• Help trap unwanted grease and remove odors with a filter that unlatches from the hood so you can wash it with soap and water at the sink.

• Bright, long-lasting LED Task Lighting makes it easy to see what you’re cooking.

• Handle the heat and cooking power of a gas cooktop with up to 65K total BTUs or any electric cooktop.

• Stay focused on cooking and making memories in the kitchen, even when venting at the highest speed. At maximum speed, sound level is 7 Sones.

• Use Push Button Controls to easily control fan speed and cooktop lighting at the push of a button.

• When the range hood is wired to operate from a dedicated standard electrical wall switch, this hood meets the Standards for Accessible Design specified by the Americans with Disabilities Act to provide equal access to all. See install instructions for ADA compliance for more details.

• A convertible design allows for installation that can be vented externally or internally. When internal venting, recirculation passes the air through charcoal filters (sold separately) to trap grease and odors before pushing the air back into the home.

• This hood can be installed without needing to vent outside. Recirculation passes the air through filters to trap grease and odors before pushing the air back into the home. Recirculation kit sold separately. Part number W11548457.

• Help regulate the flow of air through the chimney with the included 6" round damper (part number W10446915).

• Extend chimney height for ceilings from 8'4" to 12'4" with the Optional Chimney Extension Kit. See installation instructions for details. Optional Chimney Extension Kit sold separately. Part number EXTKIT10ES.

• Dimension Guide

• Owners Manual

• Video

• Video

Extended warranties can save you hundreds, sometimes even thousands of dollars in unexpected repairs. You can contact us, or visit our store for additional details.

 Thank you for choosing Hometown Brand Center.  We want to make your delivery a positive experience. Please utilize this communication to assist you in understanding our standard delivery & hookup procedures. If you have any questions, please call us & speak to your salesperson.

 *TO ASSURE A PLEASANT DELIVERY, PLEASE REVIEW THIS CHECK LIST: 

*Did you provide us with the necessary phone numbers?

*Please evaluate the dimensions of the space of your new purchase and removal of your old unit. Check the width & height of your doorways & pathways.

*Walk the path of the delivery and remove any items that may be an obstacle, such as paintings, pets, furniture, antiques, etc.  *During the winter season, remove all snow and ice from their path.

*Did you provide us with special directions if required?

*Do you want us to remove your old appliance?

*Products CANNOT be delivered without payment in full or financing arrangements completed.

*Possible additional charges!  Please inquire regarding any additional charges for professional installation and / or assistance that are not part of the standard delivery procedure. Disassembly charges may apply. Outlet installation charges may apply.

*Please take appropriate action to protect your home and flooring in case of inclement weather such as rain or snow OR refrigerator removal (water in condenser pan).

*The delivery team is not permitted to roll over or install tile or linoleum that has not been set for at least two weeks.

*Remember, installation of dishwashers, air conditioners or built-in products require an installation technician & installation fee. 

WASHERS- These units will be connected to an existing water supply and existing drain using the new hoses provided by the manufacturer, or new hoses purchased from Hometown Brand Center.  Old hoses should not be reused. Make sure shutoffs are corrosion and leak free. Please shut the water supply off before the delivery crew arrives. Washers will be leveled; shipping bolts removed, and the unit will be tested for proper operation.  Normal drain height is approximately four, (4) foot and requires a 2-inch diameter standpipe.  A drain or inlet hose extension may be needed (additional charges apply). A high household drain may hinder washer operation. A clamped or sealed drain to hose connection is not recommended.   A stable floor is also required for proper balance. We take no responsibility for leaks that develop in household plumbing prior to or after shutting off or turning on the water supply.

 ELECTRIC DRYERS- These units will be connected to existing approved outlet located directly behind dryer (providing that a new electrical cord is purchased), leveled and checked for proper operation. The normal delivery team is not permitted to perform direct electrical hook ups. We can install an outlet for $50 parts & labor (plus tax). Existing APPROVED clean dryer vent hose will be connected but NOT FURNISHED.  Venting and electrical supplies are available for additional charges. All dryers vent from the rear, see your salesperson for alternative venting options. Dryer doors swing with the hinges on the right side. Please contact your salesperson to see if the door may be reversed and at what cost.

GAS DRYERS & RANGES- These units will be set in place and leveled.  PLEASE SEE YOUR SALESPERSON FOR FURTHER DETAILS REGARDING OUR INSTALLATION PROCEDURES.  *GAS NOTE.  Gas hookup can be provided at a nominal charge. Due to code and liability a working dedicated shutoff must be located within 6 feet of the appliance. Please contact your plumber if a dedicated shutoff is not present.  Please ask your salesperson. See dryer vent and door swing notes above.

ELECTRIC RANGES- Please do not use the old oven on the day of delivery. These units will be connected to an existing approved outlet located directly behind range (providing that a new electrical cord is purchased), leveled and checked for proper operation.  The normal delivery team is not permitted to perform direct electrical hook ups.  We can install an outlet for $50 parts & labor (plus tax).

DISHWASHERS & MICROWAVES-These units will be delivered and left near your installation site.  The normal delivery team is not permitted to install your new dishwasher/microwave or disconnect your old unit.  However, we do have qualified professional installers who can assist you with your installation.  Please inquire regarding the additional charges for professional installation.

REFRIGERATORS- These units will be delivered and put in place. Refrigerators with ice or water require a household water supply to the unit. Supply line is not included. If your refrigerator has a water supply connected, please make sure it corrosion and leak free, locate the valve & shut it off. We recommend that you have a new waterline of copper or PEX installed. We take no responsibility for hooking up to poly lines due to the potential for leaks. Ask your salesperson for details. Some refrigerators have a reversible door swing. Make door reversal arrangements with salesperson prior to delivery (reversal fee applies).   Remove food from old refrigerator prior to arrival. Manufacturers recommend a 24-hour cooldown period before stocking it with food. It will be your responsibility if food is placed prior to making sure proper temperatures have been reached.  Refrigerator size affects many facets of the delivery process. Measure all pathways, doorways, stairways & walkways before the delivery. Cabinet opening is important. Measure width (high & low in both front & back of cabinet). Measure height (left & right Both front & back of cabinet). (8 measurements) There must be clearance in front of the cabinet by at least full width & depth of refrigerator. It must roll straight back not on angle. Most refrigerators only adjust height in front of unit. Many units come from the factory with slight pitch from front to back. The delivery team is not responsible for uneven floors.

YOUR OLD APPLIANCES- Our delivery team, at the time of delivery, will move your old appliance on a one-to-one basis outside your home, or haul away the old appliance (refrigerant fee may apply).  (Provided you have previously disconnected and made any necessary house or other alteration that may be required before our arrival).  If we are required to make a return trip to remove old units’ additional charges may apply.

Disconnection includes: Unplugging units (direct electrical connections mainly ranges & dryers are excluded and are part of optional outlet installation), unhook water, drain lines, dryer vents, etc.  Removal of such items such as food, clothing, or water is your responsibility.  The delivery team will not deliver your new, nor remove your old appliance to an address that is different from the original delivery address, without prior arrangements.  Additional service fees or charges may apply.

Delivery Teams cannot make house alterations nor wait for customers to make house alterations.  The delivery team will be as careful as possible when moving your appliance, but when the situation warrants, a damage waiver may be required.  Please provide adequate protection for your carpets or floors during the removal of your old unit.  Please inquire regarding any additional charges for added service needs.

Delivery Times- Because of the numerous variables such as weather, traffic, and complex deliveries, it is not possible to give you the exact time of your delivery.  However, we will attempt to call prior to your delivery.  If it is not possible for you to accept delivery in the time frame established, your delivery can be rescheduled for a more convenient delivery date and time.

.