Bangor
58 Market St. (RT 512 & 191) Bangor, PA 18013
(610) 588-6294
Brodheadsville
1421 SR 209 (West End Plaza) Brodheadsville, PA 18322
(610) 681-6170
Bosch
Model #:
NGM5056UC-DISPLAY
Color:
Stainless Steel
Clearance Clearance

500 Series, Gas hob, 30'', Stainless steel


500 Series, Gas hob, 30'', Stainless steel

Price

Everyday Price

$1,299.99



Dimensions

Width: 31

Height: 3 13/16

Depth: 21 4/16

Color

Stainless Steel


Features
  • Powerful 16,000 BTU burner for boiling, searing and stir-frying.
  • OptiSim® burner offers more flame control at the lowest settings for precise simmering and melting.
  • Electronic re-ignition will automatically re-ignite the burner in case the flame goes out.
  • Seamless, one-piece stainless steel design makes clean-up simple.
  • Continuous grates make moving heavy pots easier.
  • Bosch gas cooktops are engineered to perform precisely, offering high heat and low simmer options for optimal cooking flexibility.
Product Description

Performance Powerful 16,000 BTU Burner for Boiling, Searing and Stir-Frying STAR-K Sabbath compliant Convenience Sealed Burners Prevent Spills from Entering the Burner Box Push-to-Turn Knobs Automatic Electronic Re-Ignition - In Case Flame Goes Out, the Burner is Automatically Re-Ignited LP Conversion Kit Included for Conversion from Natural Gas to Liquid Propane Design Heavy-Duty Black Metal Knobs Low-Profile Design for an Integrated Appearance Perfect Results are Within Reach With Up-Front Centralized Controls Cooktop Design Coordinates with Bosch Ovens and Ventilation

Specification
General
Product group Hob
Brand Bosch
Product series 500 Series
Product name / series name gas hob w integrated controls
SKU NGM5056UC
Internal article number NGM5056UC
EAN code 4242005036059
Construction type Built-in
Type of control Mechanical
Type of control Front, sword knobs
Energy input Gas
Total number of cooktop burners 4
Number of gas burners 4
Number of electric cooking zones 0
Number of electric elements 0
Number of radiant elements 0
Number of halogen elements 0
Number of induction elements 0
Number of electric warming zones 0
Location of control panel Front
Gas type Natural gas 15 mbar (USA)
Alternative gas type Liquid gas 27,5 mbar (USA)
Basic surface material Stainless Steel
Color of frame Stainless steel
Gas connection rating (W) 12020
Current (A) 15
Watts (W) 360
Volts (V) 120
Frequency (Hz) 60
Power cord length (cm) 152.4
Plug type 120V-3 prong
Location of gas connection Bottom, Rear, Right
Height of the packed product (mm) 203
Width of the packed product (mm) 635
Depth of the packed product (mm) 940
Minimum height for installation (mm) 486
Maximum height for installation (mm) 486
Minimum width for installation (mm) 735
Maximum width for installation (mm) 735
Depth for installation (mm) 97
Net weight (kg) 17.4
Gross weight (kg) 20.4
Automatic programmes Yes
Location of the heating element front left
Location of 2nd heating element center left
Location of 3rd heating element back left
Location of 4th heating element middle back
Location of 5th heating element back right
Location of 6th heating element center right
Type of heating element Gas
Type of 3rd heating element Gas
Type of 5th heating element Gas
Power of the heating element 2.93
Power of 3rd heating element (kW) 2.93
Power of 5th heating element (kW) 1.61
Power on indicator No
Plate on indicator 0
Type of regulation Step energy regulated
Type of lid Without
Ignition system Yes
Residual heat indicator Without
Main on/off switch No
Safety device Without safety
Timer No
Included accessories 1 x nozzle set for liquid gas, 1 x cast iron pan support
Optional accessories HEZ27751
Time-setting options No delay options
What type of hob is it? Gas
Prevent boiling over with cooking sensor No
Flexible induction technology supported No
Hob with booster function No
Temperature control for perfect frying results No
Cord included Yes
Wok burner supported No
From the Manufacturer
Reviews (0)

Warranty

Extended warranties can save you hundreds, sometimes even thousands of dollars in unexpected repairs. You can contact us, or visit our store for additional details.

Delivery

Preparing for Delivery

 Thank you for making your purchase at Hometown Brand Center.  We want to make your delivery a positive experience. Please utilize this communication to assist you in understanding our standard delivery & hookup procedures. If you have any questions, please call us & speak to your salesperson.

 *TO ASSURE A PLEASANT DELIVERY, PLEASE REVIEW THIS CHECK LIST: 

*Did you provide us with the necessary phone numbers?

*Please evaluate the dimensions of the space of your new purchase and removal of your old unit. Check the width & height of your doorways & pathways.

*Walk the path of the delivery and remove any items that may be an obstacle, such as paintings, pets, furniture, antiques, etc.  *During the winter season, remove all snow and ice from their path.

*Did you provide us with special directions if required?

*Do you want us to remove your old appliance?

*Products CANNOT be delivered without payment in full or financing arrangements completed.

*Possible additional charges!  Please inquire regarding any additional charges for professional installation and / or assistance that are not part of the standard delivery procedure. Disassembly charges may apply. Outlet installation charges may apply.

*Please take appropriate action to protect your home and flooring in case of inclement weather such as rain or snow OR refrigerator removal (water in condenser pan).

*The delivery team is not permitted to roll over or install tile or linoleum that has not been set for at least two weeks.

*Remember, installation of dishwashers, air conditioners or built-in products require an installation technician & installation fee. 

 

WASHERS- These units will be connected to an existing water supply and existing drain using the new hoses provided by the manufacturer, or new hoses if you have purchased them prior to the time of installation.  Old hoses should not be reused. Make sure shutoffs are corrosion and leak free. Washers will be leveled; shipping bolts removed, and the unit will be tested for proper operation.  Normal drain height is approximately four, (4) foot and requires a 2-inch diameter standpipe.  A drain or inlet hose extension may be needed (additional charges apply). A high household drain may hinder washer operation. A clamped or sealed drain to hose connection is not recommended.   A stable floor is also required for proper balance. We take no responsibility for leaks that develop in household plumbing prior to or after shutting off or turning on the water supply.

 ELECTRIC DRYERS- These units will be connected to existing approved outlet located directly behind dryer (providing that a new electrical cord is purchased), leveled and checked for proper operation. The normal delivery team is not permitted to perform direct electrical hook ups. We can install an outlet for a $34.95 to $39.95 fee. Existing APPROVED clean dryer vent hose will be connected but NOT FURNISHED.  Venting and electrical supplies are available for additional charges. All dryers vent from the rear, see your salesperson for alternative venting options. Dryer doors swing with the hinges on the right side. Please contact your salesperson to see if the door may be reversed and at what cost.

GAS DRYERS & RANGES- These units will be set in place and leveled.  PLEASE SEE YOUR SALESPERSON FOR FURTHER DETAILS REGARDING OUR INSTALLATION PROCEDURES.  *GAS NOTE.  Gas hookup can be provided at a nominal charge. Due to code and liability a working dedicated shutoff must be located within 6 feet of the appliance. Please contact your plumber if a dedicated shutoff is not present.  Please ask your salesperson. See dryer vent and door swing notes above.

ELECTRIC RANGES- Please do not use the old oven on the day of delivery. These units will be connected to an existing approved outlet located directly behind range (providing that a new electrical cord is purchased), leveled and checked for proper operation.  The normal delivery team is not permitted to perform direct electrical hook ups.  We can install an outlet for a $34.95 to $39.95 fee.

DISHWASHERS & MICROWAVES-These units will be delivered and left near your installation site.  The normal delivery team is not permitted to install your new dishwasher/microwave or disconnect your old unit.  However, we do have qualified professional installers who can assist you with your installation.  Please inquire regarding the additional charges for professional installation.

REFRIGERATORS- These units will be delivered and put in place. Refrigerators with ice or water require a household water supply to the unit. Supply line is not included. If your refrigerator has a water supply connected, please make sure it corrosion and leak free , locate the valve & shut it off. We recommend that you have a new waterline of copper or PEX installed. We take no responsibility for hooking up to poly lines due to the potential for leaks. Ask your salesperson for details. Some refrigerators have a reversible door swing. Make door reversal arrangements with salesperson prior to delivery (reversal fee applies).   Remove food from old refrigerator prior to arrival. Manufacturers recommend a 24-hour cooldown period before stocking it with food. It will be your responsibility if food is placed prior to making sure proper temperatures have been reached.  Refrigerator size affects many facets of the delivery process. Measure all pathways, doorways, stairways & walkways before the delivery. Cabinet opening is important. Measure width (high & low in both front & back of cabinet). Measure height (left & right Both front & back of cabinet). (8 measurements) There must be clearance in front of the cabinet by at least full width & depth of refrigerator. It must roll straight back not on angle. Most refrigerators only adjust height in front of unit. Many units come from the factory with slight pitch from front to back. The delivery team is not responsible for uneven floors.

YOUR OLD APPLIANCES- Our delivery team, at the time of delivery, will move your old appliance on a one-to-one basis outside your home, or haul away the old appliance (refrigerant fee may apply).  (Provided you have previously disconnected, and made any necessary house or other alteration that may be required before our arrival).  If we are required to make a return trip to remove old units’ additional charges may apply.

Disconnection includes: Unplugging units (direct electrical connections mainly ranges & dryers are excluded and are part of optional outlet installation), unhook water, drain lines, dryer vents, etc.  Removal of such items such as food, clothing, or water is your responsibility.  The delivery team will not deliver your new, nor remove your old appliance to an address that is different from the original delivery address, without prior arrangements.  Additional service fees or charges may apply.

Delivery Teams cannot make house alterations nor wait for customers to make house alterations.  The delivery team will be as careful as possible when moving your appliance, but when the situation warrants, a damage waiver may be required.  Please provide adequate protection for your carpets or floors during the removal of your old unit.  Please inquire regarding any additional charges for added service needs.

Delivery Times- Because of the numerous variables such as weather, traffic, and complex deliveries, it is not possible to give you the exact time of your delivery.  However, we will attempt to call prior to your delivery.  If it is not possible for you to accept delivery in the time frame established, your delivery can be rescheduled for a more convenient delivery date and time.

Disclosures
Disclosures Warning Icon Proposition 65 Warning for California Residents
Cancer and Reproductive Harm - P65Warnings.ca.gov